TM-9-2350-277-20-5

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 5 OF 6

TM-9-2350-277-20-5 - Page 853 of 1047

TM 9-2350-277-20-5

COMMANDER’S INTERFACE BRACKET ASSEMBLY MAINTENANCE

(MFCS) (M577A3 ONLY) — Continued

0812 02

WARNING

Metal chips and grinding dust can cause eye injury. Wear goggles and gloves.

NOTE

Use two persons to support table top when drilling holes.

3.

Loosen attaching hardware at hinge points (7). Using 9/16 wrench and 9/16 socket, remove four bolts (5) from table top

(6). Tilt table top forward.

WARNING

To avoid possible rupture of fuel tank and personnel injury, do not drill any holes prior to

tilting of table top.

4.

Using drill and 3/16 in. (0.48 cm) drill bit, drill three through holes (13) in table top (6). Use helper to support table top.

0812 02-4

Change 4