TM 9-2350-277-20-5
REPAIR/REPLACE POWER DISTRIBUTION ASSEMBLY (MFCS) (M577A3
ONLY) — Continued
0812 04
REPAIR
1.
Replace defective parts as authorized by TM 9-1220-248-23&P and TM 9-2350-277-24P.
INSTALLATION
NOTE
If power distribution assembly is being installed in vehicle for the first time, proceed with Step
1. If power distribution assembly is being installed in previously-modified vehicle, proceed to
Step 3.
1.
Using a PDA mounting template (14), mark locations for four holes (13) on underside of forward driver’s side shelf (4).
Position template so left holes will be approximately 11.5 in. (29.2 cm) from shelf hanger and will be centered between
front and rear of shelf. Remove template after marking location.
081204-3
Change 4