TM-9-2350-277-20-5

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 5 OF 6

TM-9-2350-277-20-5 - Page 863 of 1047

TM 9-2350-277-20-5

REPAIR/REPLACE POWER DISTRIBUTION ASSEMBLY (MFCS) (M577A3

ONLY) — Continued

0812 04

WARNING

Metal chips and grinding dust can cause eye injury. Wear goggles and gloves.

2.

Using drill and 3/8 in. (0.95 cm) drill bit, drill four through holes (15) in lower lip of forward driver’s side shelf (4).

3.

Position PDA (12) under forward driver’s side shelf (4) and align holes. Install four socket head capscrews (1), eight flat

washers (2), and four new self-locking nuts (3).

4.

Using screw (16), install grounding strap (7) to PDA (12).

5.

Install other end of grounding strap (7) to vehicle standoff, using internal-tooth washer (8) and machine screw (9).

6.

Connect power cable 4W6 (6) to J4 connector (10) on PDA (12).

7.

Connect power/data cable 4W7 (5) to J3 connector (11) on PDA (12).

END OF TASK

0812 04-4

Change 4