TM-9-2350-277-20-5

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 5 OF 6

TM-9-2350-277-20-5 - Page 869 of 1047

TM 9-2350-277-20-5

REPAIR/REPLACE CABLE HANGER (MFCS) (M577A3 ONLY) — Continued

0812 06

INSTALLATION

NOTE

If cable hanger is being installed in vehicle for the first time, proceed with Step 1. If cable

hanger is being installed in previously-modified vehicle, proceed to Step 4.

1.

Place cable hanger (4) approximately 36 in. (91 cm) from shelf support, against rear lip of forward driver’s side shelf (1).

2.

Using cable hanger (4) as template, mark locations for two holes (2). Remove cable hanger.

WARNING

Metal chips and grinding dust can cause eye injury. Wear goggles and gloves.

3.

Using drill and 1/4 in. (0.64 cm) drill bit, drill two through holes (2) in rear lip of forward driver’s side shelf (1).

4.

Position cable hanger (4) at rear of forward driver’s side shelf (1) and align holes.

5.

Install two hexagon head screws (3) and new self-locking nuts (5).

END OF TASK

0812 06-2

Change 4