TM 9-2350-277-20-5
REPAIR/REPLACE MORTAR FIRE CONTROL SYSTEM (MFCS) CABLES
(M577A3 ONLY) — Continued
0812 07
CAUTION
To prevent damage to equipment, ensure power is turned off at power distribution assembly
(PDA) before disconnection of cable.
NOTE
Steps 12 - 13 apply to cable 34W4 for VAC power usage.
12. Disconnect cable 34W4 (18) from 120 VAC power source.
13. Disconnect cable 34W4 (18) from J5 connector (19) on PDA (11). Remove cable from vehicle.
REPAIR
1.
Replace defective parts as authorized by TM 9-1220-248-23&P.
081207-5
Change 4