TM 9-2350-277-20-5
REPAIR/REPLACE MORTAR FIRE CONTROL SYSTEM (MFCS) CABLES
(M577A3 ONLY) — Continued
0812 07
NOTE
Steps 9 - 18 apply to cable 4W6, power connection cable to vehicle batteries.
9.
Position P1 connector of cable 4W6 (1) near J4 connector (10) on PDA (11).
10. Position cable 4W6 (9) by following route of existing cables along outside wall and bulkhead of vehicle.
11. Secure cable 4W6 (9) with appropriate length of cable fastener (TM 9-1220-248-23&P). Use existing hardware and
standoffs, as available.
081207-7
Change 4