TM 9-2350-277-34
REPLACE INVERTER AND INVERTER HOUSING ASSEMBLY A2 (M1068A3
ONLY) (OUTBACK ONLY) — Continued
0094 01
31. Route the two ends of the remote cable (11) between the two inverters (31) and through the opening in the back of the
inverter housing (32), then up and into the rear of the power enclosure.
32. Pull two ends of remote cable (11) through power enclosure (3) and connect to the two disconnects (10) on the remote
cable control panel (12).
0094 01-24
Change 5