TM 9-2350-277-34
REPLACE INVERTER AND INVERTER HOUSING ASSEMBLY A2 (M1068A3
ONLY) (OUTBACK ONLY) — Continued
0094 01
28. Loosen two set screws on terminal block TB1 (19). Install cable W6E2 (20) and two cables (18) and (21) into terminal
block TB1 (19). Tighten two set screws.
29. Position inverter housing cover (17) on inverter housing and secure with ten screws (16) and new lockwashers (15).
30. Install remote cable control panel (12) on power enclusre faceplate assembly (4) using four screws (14) and new
locknuts (13).
0094 01-23
Change 5