TM-9-2350-277-34

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-277-34 - Page 680 of 871

TM 9-2350-277-34

REPLACE INVERTER AND INVERTER HOUSING ASSEMBLY A2 (M1068A3

ONLY) (OUTBACK ONLY) — Continued

0094 01

INSTALLATION

NOTE

If only replacing inverter(s), do Steps 6 - 22

If replacing inverter housing, do Steps 1 - 28 followed by removal of the power control

enclosure. See TM 9-2350-277-20-6. Then continue on with Steps 29 - 33 to complete removal of

inverter housing.

1.

Install four resilient mounts (76) on inverter housing (32) and secure with eight screws (75), flat washers (74), and

new locknuts (73).

2.

Position mounting strip (85), inverter housing (32), and bezel (80) on sponson weldnuts and secure with three screws

(79).

3.

Place four straps (78) on tray (72) and secure with 16 screws (68), 32 flat washers (69), and 16 new locknuts (77).

4.

Secure tray (72) to four resilient mounts (76) with four screws (71) and new lockwashers (70).

0094 01-13

Change 5