TM-9-2350-277-34

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-277-34 - Page 675 of 871

TM 9-2350-277-34

REPLACE INVERTER AND INVERTER HOUSING ASSEMBLY A2 (M1068A3

ONLY) (OUTBACK ONLY) — Continued

0094 01

17. Loosen two screws (57) on cable clamp (56) on side of inverter (31) enough to free remote cable (11) and communication

cable (55).

18. Loosen two screws (50) on cable clamp (51) securing cable (22) from inverter (31).

19. Loosen four terminal screws (58) and remove four remote cable leads (11) from inverter terminal block (59). Remove

remote cable (11).

20. Disconnect communication “comm” cable (55) from MATE/HUB connector (54) on inverter (31). Remove

communication cable (55).

21. Loosen three set screws (52) and remove three leads on cable (22) from inverter terminal block (53). Remove cable (22)

from inverter (IN1) (31).

22. Reinstall plastic cover with two screws along with two terminal covers, nuts , lockwashers, flat washers, and turbo fan

cover with four screws on inverter.

0094 01-8

Change 5