TM-9-2350-277-34

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-277-34 - Page 669 of 871

TM 9-2350-277-34

REPLACE INVERTER AND INVERTER HOUSING ASSEMBLY A2 (M1068A3

ONLY) (OUTBACK ONLY) — Continued

0094 01

NOTE

If only replacing inverter(s), do Steps 1 - 26

If replacing inverter housing, do Steps 1 - 4 followed by removal of the power control enclosure.

See TM 9-2350-277-20-6. Then continue on withSteps5-31tocomplete removal of inverter

housing.

1.

Remove ten screws (1), lockwashers (2), and faceplate assembly (4) from power enclosure (3).

2.

Remove two nuts (6) and safety cover (7) from terminal 2 on meter M1 (5). Unwrap strap (8).

0094 01-2

Change 5