TM-9-2350-277-34

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-277-34 - Page 668 of 871

TM 9-2350-277-34

REPLACE INVERTER AND INVERTER HOUSING ASSEMBLY A2

(M1068A3 ONLY) (OUTBACK ONLY)

0094 01

THIS WORK PACKAGE COVERS:

Removal (page 0094 01-1).

Inspection (page 0094 01-12).

Installation (page 0094 01-13).

INITIAL SETUP:

Maintenance Level

Direct Support

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0120 00, Item 62)

Materials/Parts

Locknut (16)

Locknut (8)

Locknut (3)

Lockwasher (4)

Locknuts (12)

Locknuts (2)

Locknuts (4)

Locknuts (6)

Locknuts (4)

Locknuts (10)

Personnel Required

Power-Generation Equipment Repairer 52D10

Helper (H)

Equipment Condition

Engine stopped (TM 9-2350-277-10)

Carrier blocked (TM 9-2350-277-10)

All external power disconnected

(TM 11-7010-256-12&P)

Battery ground lead disconnected

(TM 9-2350-277-20-3)

Power control enclosure removed

(TM 9-2350-277-20-6)

REMOVAL

WARNING

HIGH VOLTAGE is used in the operation of this equipment.

DEATH ON CONTACT may result if personnel do not observe safety precautions.

NEVER work on equipment unless at least one other person is nearby, familiar with the

operation and hazards of the equipment, and is familiar with giving first aid. When an operator

helps a mechainic, that operator must be warned about dangerous areas.

SHUT OFF POWER supply to equipment before beginning work. Make sure all external

power is off/disconnected.

BE CAREFUL not to contact high-voltage connections when installing or operating this

equipment.

009401-1

Change 5