TM-9-2350-277-34

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-277-34 - Page 674 of 871

TM 9-2350-277-34

REPLACE INVERTER AND INVERTER HOUSING ASSEMBLY A2 (M1068A3

ONLY) (OUTBACK ONLY) — Continued

0094 01

CAUTION

Exercise caution when removing turbo fan cover from inverter. Fan leads are connected directly

to inverter power terminals. Failure to comply may damage leads.

13. Remove four screws (46) and carefully lift turbo fan cover (42) off inverter(31)

.

14. Remove two screws (48) and plastic cover (49) from inverter (31).

15. Remove two terminal covers (41) by inserting a flat blade screw driver into the slots on the sides of the positive and

negative terminal cover and snapping the terminal cover off the studs.

16. Remove nut (45), lockwasher (44), flat washer (43), turbo fan lead (47), and power cable lug (40) from positive stud

(red) (39). Repeat procedure for power cable lug (38) on negative stud (black) (37). Do not discard nuts, lockwashers, or

flat washers.

009401-7

Change 5