TM-9-2350-277-34

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-277-34 - Page 679 of 871

TM 9-2350-277-34

REPLACE INVERTER AND INVERTER HOUSING ASSEMBLY A2 (M1068A3

ONLY) (OUTBACK ONLY) — Continued

0094 01

INSPECTION

1.

Check mount (65) and bracket (60) for condition of rubber pads (86), (87), and (88). Replace any damaged or missing

rubber pads.

WARNING

Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These

compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you

dizzy and irritate your eyes and throat.

Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.

Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.

2.

Remove damaged rubber pad and pad residue. Clean surface to be repaired with cleaning compound. Place adhesive on

new rubber pad and pad mounting surface. Position pad on mount or bracket. Let stand until adhesive is dry.

0094 01-12

Change 5