TM-9-2350-277-34

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-277-34 - Page 684 of 871

TM 9-2350-277-34

REPLACE INVERTER AND INVERTER HOUSING ASSEMBLY A2 (M1068A3

ONLY) (OUTBACK ONLY) — Continued

0094 01

12. Loosen three set screws (52) on inverter terminal block (53). Route three leads of cable (22) through cable clamp (51)

and attach to inverter terminal block (53). Tighten three set screws (52).

CAUTION

Do not over tighten cable clamp screws. Failure to comply may cause damage to wiring cable.

13. Tighten two screws (50) on cable clamp (51) securing cable (22) to inverter(31)

.

Cable

Inverter

Cable Lead

Inverter Terminals

12475189

IN1

E1

AC HOT OUT

12475189

IN1

E2

AC NEUTRAL OUT

12475189

IN1

E3

CHASSIS GROUND

12475189–1

IN2

E1

AC HOT OUT

12475189–1

IN2

E2

AC NEUTRAL OUT

12475189–1

IN2

E3

CHASSIS GROUND

0094 01-17

Change 5