TM 9–2350–311–20–2
Change 2
8–13
a.
Removal
NOTE
Tape must be removed from wiring bundle to remove any specific wiring harness. Apply tape after
assembly.
1
Disconnect connector (1), wire 625A, from power pack solenoid (2).
2
Disconnect connector (3), wire 645, at quick-disconnect from pressure switch (4).
3
Disconnect connector (5), wire 625A/645, at quick-disconnect from gunner’s selector switch box assembly
(6).
625A
645
625/645
3
4
1
2
3
1
5
6
5
M109A2/M109A3 HOWITZER