TM-9-2350-311-20-2

HOWITZER, MEDIUM, SELF-PROPELLED, 155MM; M109A2, M109A3, M109A4 AND M109A5

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL FOR CAB, ARMAMENT, SIGHTING AND FIRE CONTROL, ELEVATING AND TRAVERSING SYSTEMS AND ASSOCIATED COMPONENTS

DECEMBER 1993

TM-9-2350-311-20-2 - Page 428 of 828

TM 9–2350–311–20–2

8–4

8–1

WIRING HARNESS AND CABLE REPAIR — CONTINUED

b.

Female-Type Panel Mounting Receptacle

1

Disassembly

(a)

Push socket contacts (1) out through rear of insert (2) with pin extractor.

(b)

Unsolder cable leads (3) from solder wells of socket contacts (1).

(c)

Slide insert (2) out through rear of shell (4).

2

Assembly

(a)

Strip cable insulation equal to depth of solder wells of socket contacts (1).

NOTE

Use rosin core solder only. For soldering instructions, refer to para 2–16.

(b)

Insert cable leads (3) into solder wells of socket contacts (1) and solder.

(c)

Push insert (2) into shell (4) from rear until seated. Groove (5) in insert (2) must be alined with guide in

shell (4) to ensure proper fit.

(d)

Push socket contacts (1) into insert (2) from rear until seated.

(e)

Tape wire as required.

3

1

2

5

4