TM-9-2350-311-20-2
HOWITZER, MEDIUM, SELF-PROPELLED, 155MM; M109A2, M109A3, M109A4 AND M109A5
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL FOR CAB, ARMAMENT, SIGHTING AND FIRE CONTROL, ELEVATING AND TRAVERSING SYSTEMS AND ASSOCIATED COMPONENTS
DECEMBER 1993
TM-9-2350-311-20-2 - Page 431 of 828
TM 9–2350–311–20–2
8–7
e.
Male-Type Panel Mounting Receptacle with Ridged Locking Nut
1
Disassembly
(a)
Unscrew nut (1) from shell (2) and slide back on cable leads (3).
(b)
Push grommet (4) back on cable leads (3).
(c)
Push pin contacts (5) out through rear of insert (6) with pin extractor.
(d)
Slide insert (6) out through rear of shell (2).
(e)
Unsolder cable leads (3) from solder wells of pin contacts (5).
2
Assembly
(a)
Strip cable insulation equal to depth of solder wells of pin contacts (5).
(b)
Slide nut (1) over cable leads (3).
(c)
Slide grommet (4) over cable leads (3).
NOTE
Use rosin core solder only. For soldering instructions, refer to para 2–16.
(d)
Insert cable leads (3) into solder wells of pin contacts (5) and solder.
(e)
Push insert (6) into shell (2) from rear until seated. Groove (7) in insert (6) must be alined with guide in
shell (2) to ensure proper fit.
(f)
Push pin contacts (5) into insert (6) from rear until seated.
(g)
Push grommet (4) down cable leads (3) and over solder wells of pin contacts (5).
(h)
Screw nut (1) onto shell (2).
2
7
6
5
4
1
3
Back to Top
