TM 9–2350–311–20–2
Change 2
17–11
2
Inspect manifold assembly (15), air outlets (2), and socket packings for damage. Replace if damaged.
e.
Assembly
1
If necessary for replacement, install spring clip (18.1) on housing and precleaner (16).
NOTE
Be sure particulate filter rests against bulkhead inside housing.
2
Install particulate filter (18) in housing and precleaner (16) so air will flow through it in the direction of arrow
marked on side of particulate filter.
NOTE
Be sure gasket side of gas filter is toward manifold assembly end of
M2A2 air purifier.
3
Install gas filter (17) in housing and precleaner (16) so that it rests against gasket surface of particulate filter
(18).
4
If necessary for replacement, install four protective dust caps (15.1) on manifold assembly (15).
5
Install manifold assembly (15) on housing and precleaner (16) using three new lockwashers (8) and three
machine screws (7).
2
7
8
9
15
17
18
16
15.1
18.1