TM-9-2350-311-34-2

CAB, ARMAMENT, SIGHTING AND FIRE CONTROL, ELEVATING AND TRAVERSING SYSTEMS AND ASSOCIATED COMPONENTS HOWITZER, MEDIUM, SELF-PROPELLED, 155MM

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE MANUAL

SEPTEMBER 1994

TM-9-2350-311-34-2 - Page 292 of 552

TM 9-2350-311-34-2

6-7

ACCUMULATOR ASSEMBLY (MAIN) -CONTINUED

a. Removal - Continued

3

4

5

6

7

8

9

10

Remove nut (4), clinch sleeve (5), tube reducer (6), preformed packing (7), tube coupling (8), and tee (9)

from underside of main accumulator assembly (3). Discard preformed packing.

Loosen nut (10) and clinch sleeve (11).

Disconnect tube (12) at safety relief valve assembly (13).

Remove nut (14) and clinch sleeve (15). Disconnect tube (16).

Remove hex nut (17), preformed packing (18), and safety relief valve assembly (13) from underside of main

accumulator assembly (3). Discard preformed packing.

While supporting main accumulator assembly (3), remove two self-locking nuts (19) and open two loop

clamps (20). Remove main accumulator assembly. Discard self-locking nuts.

Remove eight cotter pins (21), four headless straight pins (22), and two loop clamps (20). Discard cotter pins.

Remove hex nut (1) and cap screw (2).

6-30 Change 2