TM-9-2350-358-BD
HOWITZER, MEDIUM, SELF-PROPELLED, 155MM; M109A6
TECHNICAL MANUAL; OPERATOR’S, UNIT, AND DIRECT SUPPORT SUPPORT MAINTENANCE
MARCH 1994
TM-9-2350-358-BD - Page 52 of 343
TM 9-2350-358-BD
3-9.
CONNECTOR PIN, BROKEN, DAMAGED, OR MISSING - CONTINUED
6.
Splice and tape wire at both ends (para 3-10).
7.
Secure loose wire to connector with tape.
8.
Record BDAR action taken.
When mission is complete, as soon as practical, repair the equipment/system using
standard maintenance procedures.
Option 2
Limitations:
None
Personnel/Time Required:
•
1 soldier
•
0.5 hour
Materials/Tools:
Tape, insulation, electrical (item 63, Appendix C)
Procedural Steps:
1.
Turn off MASTER power switch.
2.
Cut wires to remove damaged connectors.
3.
Splice corresponding wires (para 3-10).
4.
Wrap tape around first splice and leave hanging.
5.
Cut and splice next corresponding wire, approximately 1 inch from first splice.
6.
Wrap tape around second spice without breaking tape from first splice.
7.
Repeat these steps until all splices are complete.
8.
Record BDAR action taken.
When mission is complete, as soon as practical, repair the equipment/system using
standard maintenance procedures.
3-7
Back to Top
