TM-9-2350-358-BD
HOWITZER, MEDIUM, SELF-PROPELLED, 155MM; M109A6
TECHNICAL MANUAL; OPERATOR’S, UNIT, AND DIRECT SUPPORT SUPPORT MAINTENANCE
MARCH 1994
TM-9-2350-358-BD - Page 54 of 343
TM 9-2350-358-BD
3-10.
WIRES, BROKEN - CONTINUED
Option 1
Limitations:
None
Personnel/Time Required:
•
1 soldier
•
Time determined by location and amount of damage
Materials/Tools:
•
Crimping tool, terminal (found in M2/3 generic BDR kit, Section III, Appendix C)
•
Insulation sleeving, electrical (item 37, Appendix C)
•
Solder, lead-tin alloy (item 58, Appendix C)
•
Tape, insulation, electrical (item 63, Appendix C)
Procedural Steps:
1.
Strip end of broken wires.
2.
Install a section of insulation sleeving over one end of broken wire.
3.
Lay stripped ends side by side.
4.
Twist wire ends together.
5.
Solder wires together using lead-tin alloy solder.
6.
Insulate by sliding sleeve over soldered wires and crimp or wrap tape around soldered wires.
7.
Record BDAR action taken.
When mission is complete, as soon as practical, repair the equipment/system using
standard maintenance procedures.
Option 2
Limitations:
None
Personnel/Time Required:
•
1 soldier
•
Time determined by location and amount of damage.
3-9
Back to Top
