TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 536 of 933

16. INSTALL NEW PREFORMED

PACKING (1) ON HOUSING (2).

a. Coat new preformed packing (1) with

transmission oil.

17. INSTALL NEW PREFORMED

PACKING (3).

a. Coat new preformed packing (3) with

transmission oil.

b. Install packing (3) on piston (4),

with “V” groove facing down.

b. Install packing (1) on housing (2).

“V” groove on packing must be facing

down.

18. INSTALL PISTON (4).

a. Aline pin (5) on Piston (4) with hole (6)

in housing (2).

b. Press piston (4) into housing (2). Be

sure piston is fully seated.

GO TO NEXT PAGE

4-215

TM 9-2520-270-34