TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 537 of 933

TM 9-2520-270-34

NOTE

Clutch separator plates are stamped with part

numbers and must be installed in a specific

sequence for adjustments.

19. INSTALL FOUR CLUTCH FRICTION

PLATES (1) AND FOUR CLUTCH

SEPARATOR PLATES,

ITEMS (2),(3),(4)

AND (5).

a. Coat plates, items (1) thru (5) with

transmission oil.

b. Install as follows:

Separator plate 11629076-2 (2)

Friction plate (1)

Separator plate 11629076-2 (3)

Friction plate (1)

Separator plate 11629076-1 (4)

Friction plate (1)

Separator plate 11629076-3 (5)

Friction plate (1)

c. Aline holes (6) in plates (1).

21. INSTALL BACKUP PLATE (8).

20. INSTALL EIGHT SPRINGS (7).

a. Install one spring (7) in center of each

hole (6).

a. Aline eight pins (9) with springs (7) so

pins go inside springs when plate (8) is

installed.

b. Center eight pins (9) in eight

springs (7).

c. Install plate (8).

4-216

Change 3