TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 540 of 933

26. DELETED.

GO TO NEXT PAGE

CAUTION

Two “C” clamps are under spring pressure.

Use care when removing “C” clamps. Failure

to do so can result in loss of parts.

25. REMOVE BACKUP PLATE (1) TWO

CLUTCH FRICTION PLATES (2), AND

TWO CLUTCH SEPARATOR PLATES (3).

a.

b.

c.

d.

Loosen two “C” clamps (4) evenly.

Remove two “C” clamps (4).

Remove backup plate (1), two friction

plates (2) and two separator plates (3).

Removed separator plates are

11629076-1 and 11629076-3.

Set separator plates (3) aside for

reinstallation.

Change 3

4-217

TM 9-2520-270-34

27. DELETED.