TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012

TM-9-2520-272-40 - Page 483 of 620

TM 9-2520-272-40

0059

11. Put bevel gear assembly on wooden blocks as shown in Figure 3.

12.Remove two bolts (Figure 3, Item 18) and two washers (Figure 3, Item 19) and one bolt (Figure 3, Item 13) and

one washer (Figure 3, Item 14) that keeps scavenge tube assembly (Figure 3, Item 12) in position. Remove

thescavengetubeassemb

ly(F

igure3

,I

tem12)

.

NOTE

If output oil pump assembly must be sent to Depot Maintenance for overhaul, do Step 13. If

not, go to Step 14.

13.Install washer (Figure 3, Item 14) and bolt (Figure 3, Item 13). Torque bolt (Figure 3, Item 13) to 17 to

20 lb-ft (23 to 27 N·m).

14.Remove two bolts (Figure 3, Item 16) and two washers (Figure 3, Item 17) that keep output oil pump assembly

(Figure 3, Item 15) in position. Remove the output oil pump assembly (Figure 3, Item 15).