TM-9-2520-272-40
CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A
TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL
FEBRUARY 2012
TM-9-2520-272-40 - Page 474 of 620
TM 9-2520-272-40
0057
INSTALL IDLER GEAR ASSEMBLY
NOTE
Transmission is on maintenance stand, left end up.
1. Install hydrostatic pump idler gear (Figure 4, Item 7) into center housing (Figure 4, Item 4).
2. Install bearing retaining plate (Figure 5, Item 3) into center housing (Figure 5, Item 4).
3. Install six washers (Figure 5, Item 2) and bolts (Figure 5, Item 2) to attach bearing retaining plate (Figure 5, Item
3) to center housing (Figure 5, Item 4).
4. Torque six bolts (Figure 5, Item 1) to 36-43 lb-ft (49-68 N·m).
Back to Top
