TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 141 of 779

4-13. Replacement Instructions

Disconnect

Note.

The left front drain tube may b e

disconnected in the same manner .

1. Remove two cap

screws (A) and lock washers at-

taching right front cylinder head oil drain tube (B) to

Disconnect

oil pan.

1. Remove two cap screws (A) and lock washers at-

2. Separate drain tube from oil pan and remove and

taching left rear cylinder head oil drain tube to oil pan.

discard gasket.

2. Separate drain tube front oil pan and remove and

Connect

discard gasket (B).

Note.

The left front drain tube may be con -

Connect

nected in the same manner .

1. Install new gasket (B) between left rear cylinder head

1. Install new gasket between right front cylinder head

oil drain tube and oil pan.

2. Install two cap screws (A) and lock washers securing

oil drain tube (B) and oil pan.

2. Install two cap screws (A) and lock washers securing

drain tube to oil pan.

drain tube to oil pan.

Figure 4-120. Disconnecting or connectin g

Figure 4-119. Disconnecting or connectin g

left

rear

cylinder

head

oil

drain

tube.

right front cylinder head oil drain tube .

4-59