TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 171 of 779

Figure 4-174.

1. Install three bolts (A) from transmission drive

gearshaft and flywheel into puller screw holes provided.

Alternately tighten bolts until flywheel is far enough

from crankshaft dowel pins to permit installation of

lifting eye bolt.

2. Install eye bolt -5306-017-6143 (B).

Figure 4-173. Installing eye bolt—

4-89