TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 172 of 779

Figure 4-176

Remove

1. Cut locking wire and remove three bolts ( A I attaching

oil seal retainer to oil seal cap.

2. Cut locking wire and remove three bolts (B) attaching

oil seal retainer to oil seal housing.

Install

1. Install three bolts (B) securing oil seal retainer to oil

seal housing. Install locking wire.

2. Install three bolts (A) securing oil seal retainer to oil

seal cap. Install locking wire.

Figure 4-175. Removing or installing crank-

shaft oil seal retainer.

4-90