TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 336 of 779

Section IV. OVERHAUL OF TORSIONAL VIBRATION DAMPER,

FLYWHEEL, ACCESSORY DRIVE GEAR, AND TRANSMISSION

DRIVE GEAR SHAFT

6-19. General

dividual components follow the inspectio n

This section covers the cleaning, inspection ,

procedures. Refer to the following table (table 6-

and repair of the torsional vibration damper ,

10) for applicable illustrations and instruction s

flywheel, accessory drive gear, and transmission

for individual operations .

drive gearshaft. Overhaul standards of the in -

Table 6-10. Torsional Vibration Damper, Flywheel, Accessory

Drive Gear, and Transmission Drive Gearshaft

Torsional Vibration Damper

Flywheel

Accessory Drive Gear

Transmission Drive Gearshaft

Cleaning

Inspection

Para 6-2

Para 6-20b

Table 6-11

Fig. 6-38 and 6-39

Para 6-2

Para 6-20b

Table 6-11

Figs. 6-40 and 6-41

Para 6-2

Para 6-20b

Table 6-11

Para 6-2

Para 6-20b

Table 6-11

6-20. Cleaning and Inspection

a.

Cleaning.

Refer

to

paragraph

6-2.

b.

Inspection.

Refer

to

paragraph

6-3.

(1) Torsional vibration damper.

Inspec t

torsional vibration damper (6, fig. B-3) for dents

or distortion of the outer surfaces. Name and

warning plates must be intact (figs. 6-38 and 6-

39). Check vibration damper against limit s

specified in overhaul standards (table 6-11).

Replace damper that is questionable or un -

serviceable.

Figure 6-38 .

6-42

Torsional vibration dampe r

warning plate .

Repair

Para 6-21b

Para 6-21c

Para 6-4h

Para 6-21c

Figs. 6-42 and 6-43

Figure 6-39. Torsional vibration dampe r

nameplate .