TM-9-2815-205-24

6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE

FEBRUARY 2013

TM-9-2815-205-24 - Page 480 of 856

DISASSEMBLY

1.

Using puller, remove pulley (Figure 1, Item 12) from coolant pump shaft (Figure 1, Item 13).

2.

Remove seven bolts (Figure 1, Item 3), cover (Figure 1, Item 4), and gasket (Figure 1, Item 5) from coolant

pump assembly (Figure 1, Item 11). Discard gasket.

3.

If necessary, remove large pipe plug (Figure 1, Item 1) and small pipe plug (Figure 1, Item 2) from coolant

pump assembly (Figure 1, Item 11).

CAUTION

Do not press shaft into bearing assembly. Pressure on shaft will distort bearings and

destroy bearing assembly.

4.

Place bearing inserter (Figure 1, Item 7) on outer race of shaft and bearing assembly (Figure 1, Item 8).

Press shaft and bearing assembly, seal (Figure 1, Item 9), and impeller (Figure 1, Item 10) from housing

(Figure 1, Item 6).

12

1

2

7

8

9

10

3

4

5

11

6

13

MAINT_211

Figure 1.

Coolant Pump Disassembly.

TM 9-2815-205-24

0077

0077-2