TM-9-2815-205-24
6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE
FEBRUARY 2013
TM-9-2815-205-24 - Page 633 of 856
SUSTAINMENT MAINTENANCE
LOWER FRONT COVER, OIL PUMP, AND OIL PRESSURE REGULATOR REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
Tool Kit, General Mechanic's
(WP 0104, Table 1, Item 113)
Wrench, Torque, Dial, 0–175 Lb-Ft
(WP 0104, Table 1, Item 120)
Inserter, Seal (Crankshaft Oil, Front)
(WP 0104, Table 1, Item 58)
Gage Set, Depth, Micrometer
(WP 0104, Table 1, Item 44)
Guide Stud
(WP 0081, Figure 3)
Materials/Parts
Adhesive, Gasket (WP 0103, Table 1, Item 1)
Adhesive, Retaining (WP 0103, Table 1, Item 2)
Bearing, Sleeve (WP 0105, Table 1, Item 82)
Crocus Cloth (WP 0103, Table 1, Item 10)
Gasket (WP 0105, Table 1, Item 57)
Gasket (WP 0105, Table 1, Item 70)
Grease (WP 0103, Table 1, Item 18)
Oil, Engine (WP 0103, Table 1, Item 27)
Oil, Fuel (WP 0103, Table 1, Item 30)
Plug (WP 0105, Table 1, Item 85)
Sealing Compound (WP 0103, Table 1, Item 52)
Seal, Plain Encased (Model 5063-5299)
(WP 0105, Table 1, Item 48)
Seal, Plain Encased (All Except Model 5063-5299)
(WP 0105, Table 1, Item 84)
Screw, Drive
Qty: (2) (WP 0105, Table 1, Item 172)
Screw, Self-Tapping
Qty: (2) (WP 0103, Table 1, Item 50)
Stone, Sharpening (WP 0103, Table 1, Item 61)
Materials/Parts (cont.)
Stone, Sharpening X-Fine
(WP 0103, Table 1, Item 62)
Washer, Flat
Qty: (2) (WP 0105, Table 1, Item 115)
Washer, Flat Qty: (2) (WP 0103, Table 1, Item 68)
Washer, Lock
Qty: (8) (WP 0105, Table 1, Item 178)
Washer, Lock
Qty: (12) (WP 0105, Table 1, Item 23)
Equipment Condition
Engine front mounting bracket removed
(models 5063-5393, 5063-539L) (WP 0041)
Fuel line clip and solenoid valve bracket removed
(models 5063-5299) (WP 0042)
Fuel line clip and solenoid valve bracket removed
(model 5063-5392) (WP 0043)
Oil pan removed (WP 0063)
Oil pump inlet and outlet tubes removed
(model 5063-5299) (WP 0064)
Oil pump inlet and outlet tubes removed
(all except model 5063-5299) (WP 0065)
Crankshaft spacer removed
(models 5063-5299, 5063-5393, 5063-539L)
(WP 0066)
Crankshaft hub or pulley removed
(models 5063-5392) (WP 0067)
Engine front support removed (model 5063-5299)
(WP 0068)
Engine front support removed (model 5063-5392)
(WP 0069)
TM 9-2815-205-24
0089
0089-1
Back to Top
