TM-9-2815-205-24
6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE
FEBRUARY 2013
TM-9-2815-205-24 - Page 647 of 856
DISASSEMBLY
1.
If required, remove two dowel pins (Figure 2, Item 11) and two expansion plugs (Figure 2, Item 10) from
front cover (Figure 2, Item 3). Discard plugs and pins.
NOTE
To remove oil seal with upper front cover installed, drill two holes in opposite sides of
casing of oil seal. Thread sheet metal screws with flat washers into casing, and pry against
flat washers until seals are removed.
2.
Place inner face of front cover (Figure 2, Item 3) on wood blocks. Drive out two oil seals (Figure 2, Item 12).
Discard seals.
10
3
10
11
11
12
MAINT_334
Figure 2.
Upper Front Cover Disassembly.
END OF TASK
TM 9-2815-205-24
0090
0090-3
Back to Top
