TM-9-2815-205-24

6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE

FEBRUARY 2013

TM-9-2815-205-24 - Page 665 of 856

ASSEMBLY - Continued

NOTE

Camshaft gear with timing marks of two circles and two triangles goes on right camshaft.

4.

Align keyway in camshaft gear (Figure 9, Item 13) with Woodruff key in camshaft. Place camshaft gear on

camshaft (Figure 9, Item 26).

5.

Support camshaft (Figure 9, Item 26) and place 1-1/2 inch (38.10 mm) sleeve (Figure 9, Item 35) on top of

camshaft gear (Figure 9, Item 13). Press camshaft gear tight against spacer sleeve (Figure 9, Item 27).

6.

Measure clearance between spacer plate (Figure 9, Item 18) and camshaft (Figure 9, Item 26). Clearance

should be 0.008–0.015 inch (0.203–0.381 mm ) with new parts and a maximum of 0.021 inch (0.533 mm)

with used parts.

35

13

27

18

26

MAINT_347

Figure 9.

Camshaft and Cam Gear Assembly.

TM 9-2815-205-24

0092

0092-9