TM-9-2815-205-24
6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE
FEBRUARY 2013
TM-9-2815-205-24 - Page 672 of 856
REMOVAL
1.
For all, except model 5063-5393, remove screw (Figure 1, Item 8) and special washer (Figure 1, Item 7)
from left side of end plate (Figure 1, Item 3).
2.
Remove 10 screws (Figure 1, Item 1), 10 lockwashers (Figure 1, Item 2), end plate (Figure 1, Item 3), and
gasket (Figure 1, Item 4) from cylinder block. Discard gasket and lockwashers.
END OF TASK
DISASSEMBLY
CAUTION
When removing inserts, support end plate on flat surface to prevent warping or bending.
If necessary, press out inserts (Figure 1, Item 6) from rear of end plate (Figure 1, Item 3).
3
4
5
6
7
8
1
2
MAINT_352
Figure 1.
End Plate Removal/Installation.
END OF TASK
TM 9-2815-205-24
0093
0093-2
Back to Top
