TM-9-2815-205-24
6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE
FEBRUARY 2013
TM-9-2815-205-24 - Page 666 of 856
ASSEMBLY - Continued
7.
Thread nut (Figure 10, Item 14) on rear of camshaft (Figure 10, Item 26) and hand tighten.
8.
On models 5063-5392, 5063-5393 and 5063-539L, install balance weight (Figure 10, Item 19) and two bolts
(Figure 10, Item 20) on outer face of gear (Figure 10, Item 13). Torque bolts to 30–35 lb-ft (41–47 N·m).
9.
If removed, press new bearing (Figure 10, Item 24) into idler gear (Figure 10, Item 25) until flush with both
faces of gear.
13
19
20
14
25
24
26
IDLE GEAR
MAINT_348
Figure 10.
Cam Gear Assembly.
END OF TASK
TM 9-2815-205-24
0092
0092-10
Back to Top
