TM-9-2815-205-34P
ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; REPAIR PARTS AND SPECIAL TOOLS LIST (INCLUDING DEPOT MAINTENANCE REPAIR PARTS)
AUGUST 1995
TM-9-2815-205-34P - Page 10 of 332
TM 9-2815-205-34P
(4)
Spare/repair parts that make up and
assembled item are listed Immediately following the
assembled item line entry.
(5)
Part numbers for bulk materials are
referenced in this column In the line Item entry for the
item to be manufactured/fabricated.
(6)
When the item is not used with all serial
numbers of the same model, the effective serial numbers
are shown on the last line(s) of the description (before
UOC).
Not applicable.
(7)
The usable on code.
when applicable
(see paragraph 5, Special Information).
(8)
In the Special Tools List section.
the
basis of issue (BOI) appears as the last line(s) In the
entry for each special tool, special TMDE and other
special support equipment When density of equipments
supported exceeds density spread Indicated In the basis
of
issue,
the
total
authorization
Is
increased
proportionately.
(9)
The statement "END OF FIGURE"
appears just below the last Item description In Column 5
for a given figure in both Section II and Section III.
f.
QTY (Column (6)).
The QTY
(quantity per figure column) indicates the quantity of the
item used in the breakout shown on the Illustration
figure, which is prepared for a functional group.
subfunctional group or an assembly.
A "V" appearing in
this column in lieu of a quantity indicates that the quantity
is variable and the quantity may vary from application to
application.
4.
Explanation of Columns (Section IV).
a.
NATIONAL STOCK NUMBER (NSN) INDEX.
(1)
STOCK NUMBER column.
This column lists
the NSN by National Item Identification number (NIIN)
sequence.
The NIIN consists of the last nine
NSN
digits of the NSN (i.e.
NIIN
When using this column to locate an item.
iqnore the
first 4 digits of the NSN However.
the complete NSN
should be used when ordering Items by stock number.
(2)
FIG.
column This column Iists the
number of the Figure where the Item is identified/located
The figures are in numerical order In Section II and
Section Ill.
(3)
ITEM column.
The item number identifies
the item associated with the figure listed in the adjacent
FIG.
column.
This item is also identified by the NSN
listed on the same line.
b.
PART NUMBER INDEX.
Part
numbers in this index are listed by part number in
ascending
alphanumeric
sequence
(i.e.,
vertical
arrangement of letter and number combination which
places the first letter or digit of each group in order A
through Z, followed by the numbers 0 through 9 and
each following letter or digit in like order.)
(1)
CAGEC column.
The Commercial And
Government Entity (CAGE) Code (C) is a 5 digit
alphanumeric code used to identify the manufacturer,
distributor or Government agency, etc., that supplies the
item.
(2)
PART NUMBER column.
Indicates the
primary number used by the manufacturer (individual,
firm, corporation or Government activity), which controls
the design and characteristics of the item by means of Its
engineering drawings, specifications standards, and
inspection requirements to identify an Item or range of
Items.
(3)
STOCK NUMBER column.
This column
lists the NSN for the associated part number and
manufacturer identified In the PART NUMBER and
CAGEC columns to the left.
(4)
FIG.
column.
This column lists the
number of the figure where the item is identified/located
in Section II and Ill.
(5)
ITEM column.
The item number is that
number assigned to the item as it appears in the figure
referenced In the adjacent figure number column.
c.
FIGURE AND ITEM NUMBER INDEX.
(1)
FIG.
column.
This column lists the
number of the figure where the item is identified/located
in Section II and III.
(2)
ITEM column.
The item number is that
number assigned to the item as it appears in the figure
referenced in the adjacent figure number column.
(3)
STOCK NUMBER column.
This column
lists the NSN for the Item.
(4)
CAGEC column.
The Commercial And
Government Entity (CAGE) Code (C) is a 5 digit
alphanumeric code used to identify the manufacturer,
distributor or Government agency, etc., that supplies the
Item.
4
Back to Top
