TM-9-2815-205-34P
ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; REPAIR PARTS AND SPECIAL TOOLS LIST (INCLUDING DEPOT MAINTENANCE REPAIR PARTS)
AUGUST 1995
TM-9-2815-205-34P - Page 11 of 332
TM 9-2815-205-34P
(5)
PART NUMBER column.
Indicates the
primary number used by the manufacturer (individual,
firm, corporation, or Government activity), which controls
the design and characteristics of the item by means of its
engineering drawings, specifications standards, and
inspection requirements to identify an item or range of
items.
5.
Special Information.
Use the following subparagraphs as applicable:
a.
USABLE ON CODE.
Usable on code appears in
the lower left comer of the Description column heading.
Usable on codes are shown as "UOC: .
.....
" in the
Description Column (justified left) on the first line
applicable item description/nomenclature.
Uncoded
items are applicable to all models.
Identification of the
usable on codes used in the RPSTL are:
Code
Used On
A6V
Model 5063-5299, M113 FOV
B6V
Model 5063-5395, M551A2
C6V
Model 5063-5392, M730A2
D6V
Model 5063-5393, M113A3
E6V
Model 5063-5398, M551NTC
F6V
Model 5063-5299, M113 FOV
G6V
Model 5063-539F, M551
L6V
Model 5063-539L, M113A3
b.
FABRICATION INSTRUCTIONS.
B
u
l
k
materiel required to manufacture items are listed in the
Bulk Materiel Functional Group of this RPSTL.
Part
numbers for bulk materiel are also referenced in the
description column of the line item entry for the item to
be manufactured/fabricated.
Detailed fabrication instruc-
tions for items source coded to be manufactured or
fabricated are found in TM 9-2815-205-34.
c.
ASSEMBLY INSTRUCTION.
Detailed
assembly instructions for items source coded to be
assembled from component spare/repair parts are found
in TM 9-2815-205-34.
Items that make up the assembly
are listed immediately following the assembly item entry
or reference is made to an applicable figure.
When no
part number is available for a part of an assembly, that
part will have a line to the assembly bracket in the
illustration.
d.
KITS.
Line item entries for parts kits appear in
group 9401 in Section II.
e.
INDEX NUMBERS.
Items which have the word
BULK in the figure column will have an index number
shown in the item number column.
This index number is
a
cross-reference
between
the
National
Stock
Number/Part Number Index and the Bulk Materiel list in
group 9501 in Section II.
5
Back to Top
