TM-9-2815-205-34P
ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; REPAIR PARTS AND SPECIAL TOOLS LIST (INCLUDING DEPOT MAINTENANCE REPAIR PARTS)
AUGUST 1995
TM-9-2815-205-34P - Page 7 of 332
TM 9-2815-205-34P
DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
REPAIR PARTS AND SPECIAL TOOLS LIST
SECTION I.
INTRODUCTION
1.
Scope.
This RPSTL lists and authorizes spares and repair parts;
special tools; special test, measurement, and other
diagnostic equipment (TMDE); and other special sup-
port equipment required for performance of Direct
Support and General Support Maintenance of the Engine
w/Container (Models 5063-5299, 5063-5392, 5063-5393,
5063-5395, 5063-5398, 5063-539F, and 5063-539L).
It
authorizes the requisitioning, issue, and disposition of
spares, repair parts, and special tools as indicated by the
source, maintenance, and recoverability (SMR) codes.
2.
General.
In addition to Section I.
Introduction, this Repair Parts
and Special Tools List is divided into the following
sections:
a.
Section II.
Repair Parts List.
A list of spares
and repair parts authorized by this RPSTL for use in the
performance of maintenance.
The list also includes
parts which must be removed for replacement of the
authorized parts.
Parts lists are composed of functional
groups in ascending alphanumeric sequence, with the
parts in each group listed in ascending figure and item
number sequence.
Bulk materiel is listed in item name
sequence.
Repair kits are listed separately in their own
functional group within Section II.
Repair parts for
reparable special tools are also listed in the section.
Items listed are shown on the associated illustration
(s)/figure(s).
b.
Section IlI.
Special Tools List.
A list of special
tools, special TMDE, and other special support
equipment authorized by this RPSTL (as indicated by
Basis of Issue (BOI) information in DESCRIPTION AND
USABLE ON CODE (UOC) column) for the performance
of maintenance.
c.
Cross-reference Indexes.
A list, in National
Item Identification Number (NIIN) sequence, of all
National Stock Numbers (NSN) appearing in the listing,
followed by a list in alphanumeric sequence of all part
numbers appearing in the listings.
National stock
numbers and part numbers are cross-referenced to each
illustration figure and item number appearance.
The
figure and item number index lists figure and item
numbers in alphanumeric sequence and
cross-
references NSN, CAGE, and part numbers.
3.
Explanation of Columns
(Sections II and III).
a.
ITEM NO.
(Column (1)).
Indicates the number
used to identify items called out in the illustration.
b.
SMR CODE (Column (2))
.
The Source,
Maintenance and Recoverability (SMR) code is a 5-
position
code
containing
supply/requisitioning
information, maintenance category authorization criteria,
and disposition instructions, as shown in the following
breakout:
* Complete Repair:
Maintenance capacity, capability, and
authority to perform all corrective maintenance tasks of
the "Repair" function in a use/user environment in order
to restore serviceability to a failed item.
(1)
Source Code.
The source code tells you how
to get an item needed for maintenance, repair, or
overhaul of an end item/equipment.
Explanations of
source codes follows:
1
Back to Top
