TM-9-2815-205-34P
ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; REPAIR PARTS AND SPECIAL TOOLS LIST (INCLUDING DEPOT MAINTENANCE REPAIR PARTS)
AUGUST 1995
TM-9-2815-205-34P - Page 8 of 332
TM 9-2815-205-34P
Code
Application/Explanation
PA
Stocked items: use the applicable NSN to
PB
request/requisition items with these source
PC
codes.
They are authorized to the category
PD
indicated by the code entered In the 3rd
PE
position of the SMR code.
PF
PG
**NOTE.
Items coded PC are subject to
deterioration.
KD
Items with these codes are not to be re-
KF
quested/requisitioned individually.
They are
KB
pan of a kit which is authorized to the
maintenance category Indicated in the 3
rd
position of the SMR code.
The complete kit
must be requisitioned and applied.
MO-(Made at UM/
Items with these codes are not
AVUM Level)
to be requested/requisitioned
individually.
They must be
MF-(Made at DS/
made from bulk material which
AVUM Level)
Is identified by the part number
In she DESCRIPT;ON AND
MH-(Made at GS
USABLE ON CODE (UOC)
Level)
column and listed in the Bulk
Material group of the repair
ML-(Made at Spe-
parts list In this RPSTL.
If the
cialized Repair
item is authorized to you by the
Act (SRA)
3rd position code of the SMR
code.
but the source code
MD-(Made at Depot) Indicated in s made at a higher
level.
order the item from the
higher level of maintenance.
AO-(Assembled by
items with these codes are not
UM/AVUM Level)to be requested/requisitioned
individually The parts that
AF-(Assembled by
make up :he assembled item
DS/AVIM Levels must be requisitioned or fabri-
cated and assembled at the
AH-(Assembled by
level of maintenance Indicated
GS Category)
by the source code
If the 3rd
position code of the SMR code
AL-(Assembled by
authorizes you to replace the
SRA)
item.
but the source code indi-
cates the item Is assembled at a
AD-(Assembled by
higher level.
order the item from
Depots
the higher level of maintenance.
XA-
Do not requisition an "XA" coded item.
Order
Its next higher assembly (Also, refer to the
NOTE below.)
Code
Application/Explanation
XB-
If an "XB" item is not available from salvage,
order it using the CAGE and part number given.
XC-
Installation drawing, diagram,
instruction sheet,
field service drawing, that is identified by the
manufacturer’s part number.
XD-
Item is not stocked.
Order an "XD’" -coded
item through normal supply channels using the
CAGE and part number given, if no NSN is
available.
NOTE:
Cannibalization or controlled exchange, when
authorized.
may be used as source of supply for items
with the above source codes, except for those source
coded "XA or those aircraft support items restricted by
requirements of AR 700-42.
(2)
Maintenance Code.
Maintenance codes tell
you the level(s) of maintenance authorized to USE and
REPAIR support items.
The maintenance codes are
entered in the third and fourth positions of the SMR Code
as follows:
(a)
The maintenance code entered in the third
position tells you the lowest maintenance level
authorized to remove, replace.
and use an item.
The
maintenance code entered in the third position will
indicate authorization to one of the following levels of
maintenance.
Code
Application/Explanation
C-
Crew or operator maintenance done within
unit maintenance or aviation unit mainte-
nance.
O-
Unit maintenance or aviation unit category
can remove.
replace, and use the item.
F-
Direct support or aviation intermediate level
can remove, replace, and use the item.
H-
General support level can remove, replace,
and use the item.
L-
Specialized repair activity can remove, re-
place, and use the item.
D-
Depot level can remove, replace.
and use the
item.
2
Back to Top
