TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 260 of 968

TM 9-2815-210-34-2-2

FRAME 3

1.

Using

NOTE

Readings must be within limits given in table 4-50. If

readings are not within given limits, throw part away and

get a new one.

Intake valves (1) are bigger than exhaust valves (2).

depth micrometer, measure length of three intake valves (1) from tip

to gage line as shown.

2.

Using depth micrometer, measure length of three exhaust valves (2) from tip

to gage line as shown.

GO TO FRAME 4

Index

Number

1

2

Table 4-50. Intake and Exhaust Valve Length Wear Limits

Item /Point of Measurement

Intake valve length from tip to

gage line

Exhaust valve length from tip

to gage line

Size and Fit

of New Parts

(inches)

6.0820 to 6.0880

6.0700 to 6.0760

Wear Limit

(inches)

6.0980

6.0860

4-241