TM-9-2815-210-34-2-2
ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER
TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2
APRIL 1981
TM-9-2815-210-34-2-2 - Page 265 of 968
TM 9-2815-210-34-2-2
Table 4-53.
Early Model Cylinder Head Intake Valves and Guides Wear Limits
Index
Number
2
2 and 4
Item /Point of Measurement
Intake valve stem outside
diameter
Early model shot peened
intake valves
Late model chrome plated
intake valves
Fit of intake valve stem in
intake valve guide
Size and Fit
of New Parts
(inches)
0.4361 to 0.4369
0.4368 to 0.4373
0.0015L to 0.0003L
Wear Limit
(inches)
0.4356
0.4363
0.0070L
Table 4-54. Early Model Cylinder Head Exhaust Valves and Guides Wear Limits
Index
Number
2
2 and 4
Item /Point of Measurement
Exhaust valve stem outside
diameter
Early model shot peened
exhaust valve
Late model chrome plated
exhaust valves
Fit of exhaust valve stem
in exhaust valve guide
Size and Fit
of New Parts
(inches)
0.4344 to 0.4352
0.4363 to 0.4368
0.0032L to 0.0050L
Wear Limit
(inches)
0.4330
0.4358
0.0080L
4-246
Back to Top
