TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 269 of 968

TM 9-2815-210-34-2-2

(4) Valve rotors.

FRAME 1

1.

2.

NOTE

Three different valve rotors (1) can be used. All are

similar in appearance and are tested in the same way.

All valve rotors used in engine do not have to be

exactly the same.

Do this frame for all six valve rotors (1) in cvlinder

head assembly.

Check that valve rotors (1) are not worn or cracked.

cracked rotors and get new ones.

Cut a sleeve about 1 inch long from 1 1/2-inch inside

stock.

GO TO FRAME 2

.

Throw away worn or

diameter closed nipple

NOTE

CHECK ONLY THOSE PARTS WHICH ARE CALLED OUT IN

THIS FRAME. PARTS WITHOUT CALLOUTS ARE SHOWN

ONLY FOR REFERENCE PURPOSES OR ARE CHECKED IN

ANOTHER FRAME,

TA 101322

4-250