TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 250 of 968

TM 9-2815-210-34-2-2

FRAME 20

NOTE

Intake valve seat counterbores (1) are bigger than

exhaust valve seat counterbores (2).

1.

In machine shop, measure depth of three intake valve seat counterbores (1).

Depth must be 0.4155 to 0.4205 inch.

2.

In machine shop, if depth of any intake valve seat counterbore (1) is not

0.4155 to 0.4205 inch, machine to correct depth.

3.

In machine shop, measure depth of three exhaust valve seat counterbores (2).

Depth must be 0.3825 to 0.3875 inch.

4.

In machine shop, if depth of any exhaust valve seat counterbore (2) is not

0.3825 to 0.3875 inch, machine to correct depth.

5.

Send cylinder head (3) back to mechanic.

GO TO FRAME 21

4-231