TM-9-2815-210-34-2-2
ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER
TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2
APRIL 1981
TM-9-2815-210-34-2-2 - Page 243 of 968
TM 9-2815-210-34-2-2
FRAME 1 4
NOTE
Cylinder head (1) should be mounted in holding fixture
as shown.
1.
Line up new valve guide (2) with valve guide bore in cylinder head (1).
2.
Using soft-faced hammer and valve guide replacer, drive new valve guide (2)
into valve guide bore in cylinder head (1).
GO TO FRAME 15
4-224
Back to Top
