TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 233 of 968

TM 9-2815-210-34-2-2

FRAME 4

1.

2.

3.

GO

Using chain hoist (1), put cylinder head (2) with air line still hooked up into

tank of water (3) heated to 120°F.

NOTE

If cylinder head (2) leaks, air bubbles will be seen

coming out of cylinder head when it is under water.

Check that cylinder head (2) does not leak.

If leaks come from expansion

plugs in cylinder head, take out leaking expansion plugs and put in new

ones.

Refer to para 4-19a.

If leaks come from any other place, get a new

cylinder head.

Using chain hoist (1), lift cylinder head (2) out of tank of water (3).

Take

off air line (4).

Unscrew and take out air line adapter (5) and put in pipe

plug (6).

TO FRAME 5

4-214