TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 232 of 968

TM 9-2815-210-34-2-2

FRAME 3

1.

Screw lifting eye (1) into rocker arm mounting hole at center of cylinder head

(2) as shown.

2.

Screw air line adapter (3) into cylinder head (2) as shown. Join air line (4)

to air line adapter (3) as shown.

Join other end of air line (4) to hose con-

nector (5) on pressure tank (6).

3.

Join pressure tank (6) to compressed air source.

4.

Set pressure tank (6) to put 50 psi of pressure to cylinder head (2).

GO TO FRAME 4

4-213