TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 227 of 968

TM 9-2815-210-34-2-2

FRAME 2

1.

Take out two pipe plugs (1 and 2).

NOTE

A rust colored stain on cylinder head (3) below expansion

plugs (4, 5, 6, and 7) means there is coolant leakage.

Some cylinder heads (3) do not have three expansion

plugs (4).

2.

Check that three expansion plugs (4), three expansion plugs (5), expansion

plug (6), and expansion plug (7) show no signs of coolant leakage.

3.

If any expansion plug (4, 5, 6 or 7) shows signs of coolant leakage, punch

hole in plug and pry it out.

Put in new plug using brass rod and hammer.

END OF TASK

4-208