TM-9-2815-210-34-2-2
ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER
TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2
APRIL 1981
TM-9-2815-210-34-2-2 - Page 231 of 968
TM 9-2815-210-34-2-2
NOTE
Make plate of 1/2-inch thick common stock. Use
cylinder head as a template to pick up holes.
Large round holes should clear valve ports in
cylinder head as shown.
Plate should cover water
passages in cylinder head.
Figure 4-4. Cylinder Head Sealing Plate Fabrication Instructions.
4-212
Back to Top
